The Aquanoodle is a high level interactive spray structure which provides three individual water spray events. A water diverter wheel is installed in the column for manual actuation allowing participants to divert water for the different water features above. A piped in water feed is required.
The water feature is formed by turning the diverter wheel, one turn creates a spinning dome to emit a rotating 360 degree laminar spray from the top flare a second turn sends water emitting in an upward spray from a spinning 6 inch dome located on the center arm while the third turn allows water to run out into the cups creating a spinning pelton wheel dumping water as it turns.
Operation is at a maximum pressure of 30gpm @ 25psi or 1.89L/s @ 17.5m with a spray area of 160” x 120”(4059 x 3048mm).